NOTE; any coilover/shock order will have 24 hrs to cancel after ordered or be subject to a 30% cancellation fee if you change your mind later Due to Covid all production times have been extended and availabilty of product has simply decreased creating longer wait times.
We are proud to announce a new product from Radflo built specifically for PRG. These coilovers rear designed for Titan Swaps only and feature the max amount of lift and wheel travel possible using our PRG Titan upper a-arms or the SPC Titan UCA. Spring rates for these are available from 55-650lbs. These use a very nice billet upper mount and the res lines drop down the rear of the shock (frame side) to allow easy access to the spring adjusters, no fighting the hose. Like our other Titan-swap specific coilovers, when combined with our upper a-arms these offer from about 3-5" of lift. We set them up to sit about 4" taller than stock but adjusting is easy with the included spanner wrench. Default spring color is silver, shown is custom orange and red. Like other remote res shocks, these come with tabs and clamps to mount the reservoir on the front of the coil-bucket. These coilovers are built to order and typically take 3-5+ weeks to build and will come to our shop first for the springs and final details.