Contact

  • White Instagram Icon

530-268-2009

©2019 by PRG Products, Designed by Prism Designs

We are now offering these fully assembled HD Titan front shock assemblies with Eibach springs. These can be sprung about 5% up to 20% heavier than stock 4wd (600 or 650lb respectively) and will easily support a small plow or aftermarket bumper/winch combo. Or if you are just looking for a firmer/sportier ride to replace your stock worn-out Ranchos or Tokicos. These will lift the front of the following amount...2008+ 4wd about 1.5", 2007 and earlier about 2.5". 2wd will get about 2.5" on 2008+ and about 3.5 on 2004-2007. These come assembled and ready to install. We start with a 5100 series bilstein and use a custom lower spring retainer and our billet upper mounts with new HD bushings. The finished length is slightly longer than stock for a bit more wheel travel but should have no coilbucket contact on most all Titans.  Allow for 1 week or so for delivery. Install time on a stock truck is about 10-15min per side. Note: we used to modify the shocks, we no longer have to do that so these will maintain the Bilstien warantee. There is also some adjustment let on these to go taller or add more preload, but we dont suggest it. Note 2; sometimes Bilstein puts these shocks on backorder and you may have to wait a while to get them...not often but it can happen, just letting you know.

Titan 5100 HD Assembled Front Shocks

$649.00Price
Spring Rate Option